Hydrology ======================== Learn how to set up rainfall and infiltration using QGIS and the FLO-2D Gila Plugin. .. Note:: It will be easier to view these videos on YouTube. Set the video playback speed to 2x to complete the lessons faster. Load the Project ------------------- .. raw:: html Assign an Inflow Node -------------------------- .. raw:: html Assign Rainfall ----------------- .. raw:: html Infiltration - Assign SCS Curve Number ------------------------------------------- .. Important:: FLO-2D uses three infiltration types. Choose one lesson and skip the other two. .. raw:: html Infiltration - Assign Horton ----------------------------------------------- .. Important:: FLO-2D uses three infiltration types. Choose one lesson and skip the other two. .. raw:: html Infiltration - Assign Green and Ampt ---------------------------------------------- .. Important:: FLO-2D uses three infiltration types. Choose one lesson and skip the other two. .. raw:: html Save Export and Run ----------------------- .. raw:: html