Ctrl+K

Lesson 5 – Realtime Rainfall Data

Lesson 5 – Realtime Rainfall Data#

Overview#

Lesson 5 outlines the process of setting up realtime rainfall data in the raincell.dat file. It is important to perform this tutorial on a Lesson 1 skeleton project. Finish Lesson 1 through Step 5 before performing the following steps.

This video shows the full process of this tutorial.

Required Data#

The lesson makes use of QGIS Lesson 1 and rainfall data *.ASC files in QGIS Lesson 5.

File

Content

Location

*.asc

ASCII Grid File

QGIS Lesson 5

*.rfc

Rainfall Catalog File

Project Location C:\Users\Public\Documents\FLO-2D Pro Documentation\Example Projects\QGIS Tutorials

Check these folders to ensure the data is available before starting the lesson.

Step-by-Step Procedure#

To build RAIN.DAT and RAINCELL.DAT following these steps.

  1. Complete QGIS Lesson 1 to Step 5;

  2. Set up the rain editor;

  3. Import the rainfall data;

  4. Export the project;

  5. Transfer RAIN.DAT and RAINCELL.DAT files;

  6. Run the simulation.

Step 1: Setup the project#

  1. Set up a “Skeleton Project”. RAINCELL.DAT is a large file and it is not necessary to keep it in the regular project GeoPackage. It will slow the model down and the RAINCELL.DAT is not a file that needs to be regenerated.

  2. Follow the QGIS Lesson 1 steps up to Step 5.

Step 2: Rain editor#

  1. Set up the Rain Editor widget by checking the Simulate Rainfall, Building Rain and Realtime Rainfall check boxes.

../_images/Worksh132.png

Step 3: Import rainfall data#

  1. Click the Import Realtime Rainfall ASCII files button.

../_images/Worksh133.png

  1. Select the folder to import the data.

C:\Users\Public\Documents\FLO-2D PRO Documentation\Example Projects\QGIS Tutorials\QGIS Lesson 5

  1. The plugin will read the catalog file and the ASCII grid files and interpolate the realtime rainfall data to the grid.

  2. The data processing takes time. Track the the progress by the processor by how many auxillary files exist.

../_images/Worksh134.png

  1. Once the processing is complete, click OK to close the dialog box.

../_images/Worksh135.png

Step 4: Export the project#

  1. This is a good point to save project. Refer to Step 9 in Lesson 1.

../_images/Worksh083.png

  1. Export the data files to the Project Folder in QGIS Lesson 5.

../_images/Worksh021.png

C:\Users\Public\Documents\FLO-2D PRO Documentation\Example Projects\QGIS Tutorials\QGIS Lesson 5\Lesson 5 Export

  1. All GDS data files will be created in the selected project folder, including RAIN.DAT and RAINCELL.DAT files.

../_images/Worksh136.png

Step 5: Transfer the RAIN.DAT and RAINCELL.DAT files#

  1. To use the new Rainfall data it needs to be transferred to a project folder. This project can be started by adding the FLOPRO.EXE Engine to the folder or by calling it from the Plugin.

  2. Copy the RAIN.DAT and RAINCELL.DAT files to the Lesson 4 Export folder.

  3. Replace the original RAIN.DAT file.

C:\Users\Public\Documents\FLO-2D PRO Documentation\Example Projects\QGIS Tutorials\QGIS Lesson 4\QGIS Lesson 4 Export

../_images/Worksh137.png

Step 6: Run the simulation#

  1. Click the Run FLO-2D Icon.

../_images/Worksh0052.png

  1. Set the Project path and the FLO-2D Engine Path and click OK to start the simulation.

../_images/Worksh138.png
Contents